Palworld Dedicated Server Requirements: RAM, CPU, Storage and Ports
Palworld's server is hungrier than most people expect, and memory is where the trouble starts. If you're picking a plan or sizing a machine, the official numbers are the place to begin.
Everything below is from the official Palworld Server Guide's requirements page (version 1.0.4 when we checked on November 21, 2026). The page lists no client requirements, so this is only about the server side.
- Official: 4+ cores, 16 GB RAM, SSD, 64-bit Windows or Linux.
- 8 GB can boot but raises the risk of out-of-memory crashes.
- Default port is UDP 8211.
On this page
The official numbers
| Item | What the docs say |
|---|---|
| CPU | 4 cores or more recommended |
| Memory | 16 GB listed. 8 GB can boot, but the docs say it raises the chance of out-of-memory crashes. |
| Storage | A fast SSD recommended. Slow storage may corrupt save data. |
| Operating system | 64-bit Windows or 64-bit Linux (Ubuntu and AlmaLinux are given as examples) |
| Network | UDP port 8211 by default, changeable. Port forwarding has to be set up on your router if you host at home. |
The memory line on that page is worded oddly: it lists 16 GB, then also says something about "larger than 32GB." We can't tell what that second figure is meant to refer to, so we're only relying on the parts that are clear: 16 GB is the stated figure, and 8 GB is the floor with a warning.
What that means in practice
- Memory first. A server that boots on 8 GB isn't a server that stays up on 8 GB. If you're planning for several players and a lived-in world, treat 16 GB as the number to aim for. The lag and crash guide covers what to do when memory runs short.
- Cores over clock speed gimmicks. Four cores is the recommendation, so a plan with fewer than that is asking for trouble once the world grows.
- SSD matters for saves. The docs tie slow storage to corrupted saves, which is worse than lag. Keep Backups turned on either way.
- Linux is fine. Both Windows and Linux are supported, so the choice comes down to what you're comfortable running.
The port
The default is UDP 8211. Because it's UDP, a TCP-only forward won't do anything. On ChicagoServers, ports are set up for you, and you can see them on the Startup tab. If players can't connect, the connection timed out guide walks through the causes.
Choosing a plan
Match the plan's RAM to the number you want, not the minimum. Palworld worlds grow with bases, workers and Pals, and the heavy settings are explained in the server settings guide. If you want to compare plans, the Palworld server hosting page lists them. And if you're deciding between a private server and a listed one, read dedicated vs community first.
Frequently asked questions
How much RAM does a Palworld server need?
The official docs list 16 GB. The server can boot on 8 GB, but the docs warn it increases the risk of out-of-memory crashes.
How many CPU cores does a Palworld server need?
The docs recommend 4 cores or more.
What port does Palworld use?
UDP 8211 by default, and it can be changed. If you host at home you need to forward it on your router.
Can I run a Palworld server on Linux?
Yes. The requirements page lists 64-bit Windows and 64-bit Linux, with Ubuntu and AlmaLinux as examples.
Should I run a Palworld server in Docker Desktop?
The official docs call Docker Desktop deployment deprecated because of storage I/O concerns and a higher risk of save corruption, so no.