Game Server Glossary: Terms Every Server Owner Should Know
Running a game server means picking up a vocabulary nobody hands you. Someone tells you to open a UDP port, check your TPS, or send the command over RCON, and you nod and search for it later. This page is the later.
The entries are short on purpose, grouped by topic, and many link to a longer guide or a free tool when there is one. A few are specific to one game, and we say which. Defaults such as port numbers are common values, and your host or your own settings may use different ones.
- Ping is distance and route, TPS is how hard the server is working, and they are different problems with different fixes.
- Most "nobody can connect" problems are a wrong port, the wrong protocol (TCP or UDP), or a firewall.
- Mods change the game and usually need to be installed on players' computers too. Plugins run on the server only, in games that support them.
On this page
Connection and network terms
Ping (latency). The time, in milliseconds, for a small message to travel from your computer to the server and back. Lower is better, and distance is the biggest factor. The ping and server location guide goes deeper, and the latency estimator gives a rough number for your city.
Jitter. How much your ping changes from one moment to the next. A steady 60 ms usually feels better than a ping that bounces between 20 and 120 ms.
Packet loss. Small chunks of data that never arrive. A little packet loss shows up as stutter or rubber banding, and a lot of it makes a game unplayable no matter how low your ping looks.
Rubber banding. When your character snaps back to an earlier position because the server disagrees with where your client thinks you are. Causes include packet loss, a laggy server and a bad route. See the Valheim lag guide for one worked example.
IP address. The numeric address of a machine on the internet, such as 203.0.113.10. Players join with an IP address or a domain name that points to one. See what a game server IP and port are.
Port. A numbered door on an IP address. The IP finds the machine, and the port finds the right program on it. Minecraft Java defaults to 25565, Rust to 28015 and CS2 to 27015. Your host may assign different ones, so use the ones shown in your panel.
TCP and UDP. The two main ways programs send data. TCP checks that everything arrives, in order, and resends what is lost. UDP skips that checking and is faster, which is why many games use it. Minecraft Java uses TCP, while Minecraft Bedrock, Rust, Valheim and Palworld use UDP. A forward or firewall rule for the wrong one is a very common cause of a server nobody can reach.
Query port. A second port that lets server lists and status tools ask a server for its name, map and player count. Some games need it open for the server to appear in the in-game browser, even though players join through the game port.
Port forwarding. A router setting that sends traffic arriving at one of your public ports to a machine on your home network. You only need it when you host at home. A hosted server has public ports already. See hosting at home versus hosting.
NAT and CGNAT. NAT lets many devices share one public IP address. CGNAT (carrier-grade NAT) means your internet provider does that to many customers at once, so you may not have a public address of your own and port forwarding cannot work. If your forward is correct and the port checker still says closed, ask your provider.
Firewall. Software or hardware that blocks traffic unless a rule allows it. A server can be running perfectly and still be unreachable because the firewall on the machine or the router blocks the port.
DDoS. A distributed denial of service attack floods a server or its network with junk traffic until real players cannot get through. Protection filters that traffic before it reaches the server. Read DDoS protection explained for what it does and does not cover.
Region or location. Where the server's machine physically sits. Pick the one closest to most of your players, since distance sets the lowest ping you can get.
Performance terms
Tick and tick rate. A server updates the game world in repeating steps called ticks. Minecraft runs 20 per second, so each tick has a budget of 50 milliseconds. Other games use different rates. For CS2, Valve describes a sub-tick system, where your actions are timestamped between ticks.
TPS. Ticks per second. A healthy Minecraft server holds 20. When the server cannot finish its work in time, TPS drops and everything feels slow, including mobs, redstone and block breaking. See finding lag with TPS and spark.
MSPT. Milliseconds per tick, meaning how long the server actually spent on each tick. In Minecraft it should stay under 50. It can tell you more than TPS, because TPS stays at 20 until MSPT goes over the limit.
Lag. A loose word for several different problems. Server lag means a slow tick rate and affects everyone. Network lag means high ping or packet loss and may affect one player. Client lag is low FPS on your own computer. Work out which one you have before you change anything.
RAM. Memory the server uses while running. Too little causes crashes or slowdowns, and more than you need does not make a game faster. The RAM calculator and the RAM and CPU guide list what each game asks for.
CPU and single-thread speed. Many game servers do most of their work on one main thread, so a fast core often matters more than a long list of cores. That is a common pattern rather than a rule, and it varies by game.
Chunk and view distance. Minecraft splits the world into 16 by 16 block columns called chunks. View distance is how many chunks around each player the server keeps loaded, and a high setting costs RAM and CPU. Generating new chunks is expensive, which is why people pregenerate a world. See the Chunky pregeneration guide.
Entity. Anything in the world that is not a plain block, such as mobs, dropped items and minecarts. Large numbers of entities in one area are a classic cause of lag.
Profiler. A tool that records where the server spends its time, so you can see which plugin, mod or farm is responsible. Minecraft's spark is one example.
Types of server and access
Dedicated server. A program that runs the game world without a player sitting in it. It keeps running when nobody is online, and it does not depend on any one player's computer or connection.
Listen server and peer-to-peer. The opposite setup. One player hosts from inside their own game, so the world is there only while they are playing and the host's connection carries everyone.
Slot. One space for a player. Some plans are priced per slot, some by RAM and some at a flat rate, so compare on what you actually need.
Whitelist. A list of players allowed to join. Anyone not on it is refused. See whitelists, ops and bans and the whitelist and ops JSON builder.
Operator (op) and admin. A player with permission to run administrator commands. How you grant it depends on the game, for example ownerid and moderatorid in Rust and permission files in Minecraft. Give it only to people you trust.
Ban list. A record of players who are refused entry. Most games let you ban by account ID rather than by name, because names can change.
Online mode. A Minecraft setting that checks each joining player's account with Mojang's login service. Turning it off lets anyone join under any name, so it is best left on unless you know why you are changing it. See server.properties explained.
Crossplay. Letting players on different platforms join the same server. It is usually a feature of a specific game version and needs particular settings. See the Valheim crossplay guide and the Minecraft Bedrock crossplay guide.
MOTD. Message of the day. In Minecraft it is the short text that appears under the server name in the server list. The MOTD generator builds it with colors and formatting.
Admin and file terms
RCON. Remote console. A way to send commands to a running server from another program, over the network and protected by a password. Minecraft ships with it turned off, and its default port is 25575 when you enable it. Keep the password strong and the port closed to everyone who does not need it.
SFTP. A secure way to upload and download server files. You connect with a client program and a login, then move files like in a normal folder. See using SFTP with your game server.
Startup parameters or launch options. Extra settings passed to the server program when it starts, such as a port, a player limit or a world name. The Palworld launch options guide shows what this looks like in practice.
Config file. A text file the server reads at startup that holds its settings, like server.properties in Minecraft or server.cfg in Rust and CS2. Edit it while the server is stopped, because many servers overwrite it on shutdown. The generator tools on our tools page write these files for you.
Cron. A scheduler found on Linux systems. A cron line says when a command should run, such as a nightly restart. The restart schedule builder writes the line and shows the next run times.
Backup. A copy of the world and settings you can restore after a crash, a bad update or a mistake. A backup you have never restored is only a hope, so test one. See how to back up and restore a game server.
Wipe. Resetting a world or its progress. In Rust, a map wipe makes a new map and a blueprint wipe also clears learned blueprints. Servers announce a schedule so players know when to expect it. See wipe schedules explained.
Seed. The value a game uses to generate a world. The same seed on the same version gives the same world. See the Minecraft seed guide.
Mods, plugins and server software
Mod. Something that changes or adds to the game itself, such as new blocks, creatures or systems. In Minecraft, mods run on a loader like Forge, NeoForge, Fabric or Quilt, and players usually need the same mods installed on their own computers. See installing Forge and Fabric mods.
Plugin. An add-on that runs on the server and uses the server software's own tools. For Minecraft plugins on Paper, players do not need to install anything. See installing plugins on Paper.
Modded and vanilla. Vanilla means the game as its developer ships it. Modded means it has mods or plugins. Neither is better, but they set up differently. See modded versus vanilla servers.
Server software. The program that actually runs the world. In Minecraft you can choose from vanilla, Spigot, Paper, Purpur and others, which differ in speed and plugin support. See Paper, Spigot, Purpur and vanilla compared.
Modding frameworks. Several games have a community framework that loads mods, such as Oxide and Carbon for Rust, BepInEx for Valheim, and Metamod with CounterStrikeSharp for CS2. These are third-party projects, so check each one's own documentation. See Rust, Valheim and CS2.
Datapack and game rule. Minecraft features that change behavior without a plugin. A datapack adds or alters content through files, and a game rule is a switch such as whether mobs grief. See datapacks and game rules.
Steam and account terms
SteamID64. A 17 digit number that identifies a Steam account, and the form most server tools ask for. It can be written in other ways too, and the SteamID converter switches between them.
App ID. The number Steam gives each game or server tool. Dedicated server downloads use it, and so do some login tokens.
SteamCMD. Valve's command-line program for downloading and updating many dedicated servers. A hosted plan normally does that for you.
GSLT. Game Server Login Token. A token you create on a Steam account and give to a server so Steam can recognize it. It belongs to one app ID, and you should keep it private. See the CS2 GSLT guide.
Frequently asked questions
What is the difference between ping and TPS?
Ping is the delay between a player and the server and depends mostly on distance and the network route. TPS is how many game updates the server completes each second and depends on the server's own workload. A player can have low ping on a server with low TPS, and the reverse.
Do I need to open both TCP and UDP for my game server?
Only the ones your game uses. Many games use UDP for play, and Minecraft Java uses TCP. Opening the wrong one is a frequent mistake, so check the game's documentation or your panel for the right protocol and port.
Is a mod the same thing as a plugin?
No. A mod changes the game itself and often has to be installed by players as well. A plugin runs on the server through the server software's own tools, so players usually install nothing. Which one you can use depends on the game and the server software.
Where do I find the default ports for my game?
The game's own documentation is the best source, and on a hosted server your panel shows the ports assigned to you. Our <a href="/guides/what-is-game-server-ip-and-port/">IP and port guide</a> explains how to read them, and the <a href="/tools/cant-connect-troubleshooter/">troubleshooter</a> walks through what to check when joining fails.