Terraria Multiplayer: How to Join a Server by IP, Steam or Host and Play
There are three ways to play Terraria with other people. You can join a dedicated server by IP address, host from your own game with Host and Play, or use Steam to join friends. A dedicated server is the best fit for a world that stays online, because it does not depend on anyone's game being open.
This guide explains each method and how to join a ChicagoServers server. It was checked on 2026-11-17 against the Terraria Wiki's server and Steam multiplayer guides, which do not cover every detail, such as the exact network protocol for port 7777. Those gaps are marked. If you want to set up the server itself, start with the serverconfig guide.
- To join a dedicated server: Multiplayer, Join via IP, choose your character, then enter the server's address. If the port is not the default 7777, include the port you were given.
- On ChicagoServers, copy the address from the top of your server page. You do not need to forward ports.
- Steam multiplayer is desktop-only, needs Terraria 1.3.0.1 or later, and works through Steam friends.
- Host and Play suits LAN or short co-op sessions. The wiki recommends a dedicated server for saving.
- Enter the join password if the server asks for one.
On this page
Join a dedicated server by IP
- Get the address
On ChicagoServers, open your server in the panel. The address and port are shown at the top of the page and under Network on the Startup tab, and clicking the address copies it.
- Open Join via IP
From the title screen go to Multiplayer, then Join via IP.
- Choose a character
Select or create the character you want to play.
- Enter the address
Type the server's IP, and the port if it is not the default. The default port is 7777.
- Enter the password
If the server has a join password, enter it when asked. On ChicagoServers it is the Join password on the Startup tab.
Steam multiplayer
Steam multiplayer lets you host or join through the Steam Friends list instead of an IP address. It is for the desktop version only, needs Terraria 1.3.0.1 or later, and uses Steam to broadcast the world. The wiki is clear that it does not create a dedicated or LAN server.
| Mode | How it works |
|---|---|
| Friends Only | Friends on your Steam Friends list can join without an invite. |
| Invite Only | Only friends you invite can join. The Join Game button may be greyed out for others, so ask for an invite. |
- To join a Friends Only world: go to Multiplayer, Join via Steam, open the friend's menu in the Steam Friends list and click Join Game.
- To host: choose Multiplayer, Host and Play, pick a character and world, then choose Friends Only or Invite Only. You can set a password or leave it blank.
- On a dedicated server, the wiki lists
-steamand-lobby friendsor-lobby privateoptions. On ChicagoServers the launch line is managed for you, and most players simply join by IP.
Host and Play vs a dedicated server
| Host and Play | Dedicated server | |
|---|---|---|
| Where it runs | In the host's own game. | On a server, with no game client needed. |
| Best for | Home LAN or short online co-op, per the wiki. | A world that stays online and saves reliably. |
| Saving | May not save the last few minutes of changes, per the wiki. | Saves on shutdown with exit, and periodically. |
| Availability | Only while the host is playing. | Always on, even when you are away. |
If you already have a world on your PC, you can move it to a server. See how to upload a Terraria world.
If you host from your own computer
This does not apply to a ChicagoServers server, where networking is handled for you. For a server you run yourself, the Terraria Wiki says:
- The default port is 7777. Forward it on your router for players outside your network. The wiki does not say whether to use TCP or UDP in that guide, and another wiki page gives TCP 7777 as the default and says to open both TCP and UDP 7777 on cloud providers. Forwarding both is the cautious choice.
- Give the server computer a static local IP, or the router may change it.
- Players on your own network use the computer's local IPv4 address. Players on the internet use your router's public IP.
- Make sure your firewall allows
TerrariaServer.exeand port 7777. - A dynamic public IP can change, so the wiki suggests dynamic DNS for internet play.
upnp=1in the config lets the server forward ports automatically.-noupnpturns it off.
For the general idea of addresses and ports, see what is a game server IP and port.
When joining fails
| Problem | Likely cause and fix |
|---|---|
| Cannot connect at all | Wrong address or port, or the server is offline. Copy the address from the top of the server page and check the server is running. |
| Connection works for you but not friends (own PC) | The port is not forwarded, or a firewall blocks it. See the section above. |
| Asks for a password you do not know | The server has a join password. Check the Startup tab or ask the owner. |
| Version mismatch | The server and your game need to be on the same Terraria version. Update the game or the server. |
| Join Game is greyed out (Steam) | The world may be Invite Only. Ask the host for an invite. |
| Steam join does not appear | Steam multiplayer is desktop-only and needs a friend relationship with the host. |
For other join problems, see how to fix can't connect to a game server. Looking for a host? See Terraria server hosting.
Frequently asked questions
How do I join a Terraria server by IP?
Go to Multiplayer, Join via IP, choose a character and type the server address. Include the port if it is not the default 7777.
What port does Terraria use?
7777 by default. The wiki's server page lists TCP 7777 and says to open both TCP and UDP 7777 on cloud providers.
What is the difference between Host and Play and a dedicated server?
Host and Play runs in the host's game and suits LAN or short co-op. A dedicated server runs without a game client, stays online and saves more reliably.
Can I join a Terraria server through Steam?
Yes, for Steam multiplayer worlds hosted from a desktop game, through Multiplayer, Join via Steam and your friends list. It needs Terraria 1.3.0.1 or later.
What is the difference between Friends Only and Invite Only in Terraria?
Friends Only lets any Steam friend join. Invite Only lets only the friends you invite join.